Ford Truck World


Advertise YOUR LOCAL OR NATIONAL BUSINESS here by contacting Mr. Legion Anders by telephone at US: (310)-651-1250 or by email

Forums

: Installations

Excursion System build 16 - 12`s and 20k

All times are Pacific

Pg 1/2

Post Reply

New Topic

Active Topics

Forward

Report Topic

Kingsuv
Member

Posts: 22
Registered: 3/29/06
Status: Offline
From: CA

Click for more photos in Kingsuv's gallery!

10/25 10:25a

Here is a link to the good ol days with it. It`s been without a system since about late 07.
[url=http://www.stevemeadedesigns.com/board/index.php?showtopic=68]Full Excursion - Kingsuv`s On Going Build - The Forum

1st set of the 30 some odd sets I have to make.

A large part of this ongoing build will be redoing stuff that was done in a rush the first time. Most of what you see ( or don`t

) was done mostly just before a comp or a car show, so there is way more ratsnest then any one car should have. Now that I have time to go through it, I will post up whats being done like it should of the 1st time.

Don`t ask for before pics, I didn`t take any and I`m sure as hell ain`t going to post any.

Today`s project was to redo the A pillar gauges. It wasn`t some much as an issue as it was for convenience and looks. The wire was scraps and all the connectors were crimped. Now it`s pimp. Too bad the only time you will see it is here in pics

Kingsuv
Member

Posts: 22
Registered: 3/29/06
Status: Offline
From: CA

10/25 10:26a

Also picked up A new distro block for all my addons.

And have been working on these for days now. I`m about half done.

Added a little more bling for the center console.

More Molex plugs, soldering, Texflex, and shrink wrap.

Got a package in today. Thanks to Scottie Johnson for the great deal on some nice RCA`s

Started marking all my channels so I can lay them in the truck tomorrow.

Decided to do the PXA H510 For the rear processor. I have 3 of them so I might as well use one

Besides, Have a sweet spot to add the controller in the rear of the center console

Also picked up a lumber rack for the shop. Now that it has wheels I will move it over to the shop

Have just about all the power side of the control worked out. If all goes well I will have all the RCA`s and AI-net, and Speaker wire ran tomorrow.

Then I will pull it all out and PIMP it out with some brand new Second Skin Damplifier Pro Black next week.

Oh and I have some stuff sitting around here thanks to Scottie at XS power.

I needed a solid way to bolt everything down. Sheetmetal screws suck when you have one of these

It`s like having pop rivets with threads in the middle

Kingsuv
Member

Posts: 22
Registered: 3/29/06
Status: Offline
From: CA

10/25 10:28a

Here is some of what is going in.

And then the control center.

It`s a tight fit. And sure to be fun to wire up.

I am using 3 HR-4125`s with a total 16 channels of processing. I used 3 HF-1000.1`s to mock up where I want them to go

Then you can`t forget about the madness.

I haven`t decided if I will use 2 Inferno 8.1`s or 4 HF-2500.1`s yet. Or maybe I will use more

Started off needing a false floor for the center console. The brain and 2 processors will be housed in there as well as the Sirius and the ipod control.

Kingsuv
Member

Posts: 22
Registered: 3/29/06
Status: Offline
From: CA

10/25 10:31a

ANT over at Second Skin hooked me up proper!

He said I wasn`t busy enough so he sent me more work to do

The UPS man hasn`t been too happy with me lately. He asked if I had any packages coming in that wasn`t over 50 lbs. I said just wait till my sub order comes in